Products organised around critical machine positions

Permanent-magnet and electromagnetic brakes

Warner Electric is a global leader in electromagnetic clutch and brake technology. Available documentation covers extreme-thin brakes, permanent-magnet clutch and brake applications, static holding and emergency stops.

• Holding or dynamic-braking function
• Torque, speed, duty and energy per stop
• Diameter, thickness, bore and mounting pattern
• Voltage, power, temperature rise and ambient temperature

Brake documents →

Custom bearings and seals

For positions where a standard part does not meet envelope, life or environmental requirements. Start with a sample, drawing or critical dimensions.

• Bore, outside diameter, width, rolling elements and accuracy
• Seal shaft, housing bore, media, pressure and lip design
• Load, speed, temperature, shock and contamination
• Material, coating, quantity and inspection requirements

Robotic bearings, seals and brakes

For collaborative, humanoid, surgical and mobile robots, plus joint modules. Compact packaging, low backlash, mass and power-off holding are key.

• Joint size, output torque and maximum speed
• Hollow-bore routing, thickness and mounting pattern
• Repeatability, stiffness, low noise and low dust
• Power-off holding and emergency-stop requirements

Gearbox bearings

Deep-groove, angular-contact, cylindrical, tapered and spherical roller bearing directions are matched to gearbox speed, load and axial-location strategy.

• Gearbox layout, ratio and input/output speed
• Radial and axial loads from gear mesh
• Clearance, precision, fits and lubrication
• Existing part number, dimensions and failure evidence

Machine-tool spindle bearings

Spindle bearings must balance accuracy, speed and stiffness; envelope dimensions alone are not enough.

• Maximum and normal speed, power and tool-end load
• Arrangement, contact angle, accuracy and preload
• Grease or oil-air lubrication and cooling
• Temperature, vibration, noise and machining symptoms

Industrial seals

Rotary shaft seals, oil seals and contamination barriers are reviewed against media and operating conditions.

• Shaft, bore, width and profile photographs
• Speed, temperature, pressure and runout
• Oil, grease, water, dust or chemicals
• Material, lip, spring and exclusion features

Gear drives and gearmotors

Available documents cover HERA right-angle gear drives and Bauer gearmotors. Selection starts with power, torque, ratio, mounting and environment.

• Input power, output torque and ratio
• Shaft input, hollow shaft or flange interface
• Mounting orientation, duty and service factor
• Food, washdown, heat or corrosion requirements

Couplings and drivetrain safety

Product directions include elastomeric and grid couplings, backstops and overrunning clutches, and torque limiters.

• Shafts, keyways, power, speed and torque
• Misalignment, vibration, shock and starts
• Holdback direction, reverse speed or release requirement
• Overload setting and reset method

Power-transmission documents →

Custom screws and linear guides

Linear-motion components for machine tools, robots and automation equipment can be specified from drawings, stroke and accuracy requirements.

• Rail width, carriage, hole pitch and datum
• Screw diameter, lead, support and end machining
• Stroke, speed, load, accuracy and preload
• Lubrication, protection, quantity and accessories

Lubrication and condition monitoring

Central lubrication, mounting tools, alignment and monitoring support more reliable maintenance.

• Lubrication points, media, lines and controls
• Machine speed and measurement positions
• Temperature, vibration, noise or alignment issue
• One-off, route-based or continuous monitoring